check concrete coverage
requirements for each product Call 800.999.3959 for additional
information
Pre-formed rubber strip with stainless steel mesh. Size, 20mm X 10mm, (Approximately 3/4" X 3/8"). Used to replace conventional PVC waterstops in construction joints and control joints. Packaged in 82 feet per case. Pre-formed rubber strip with stainless steel mesh. Size, 20mm X 5mm, (Approximately 3/4" X 3/16"). Used to replace conventional PVC waterstops in construction joints and control joints.
Pre-formed rubber strip with adhesive back.
Size, 20mm X 5mm, (Approximately 3/4" X 1/4"). Typically used in piping
penetrations, H-pile waterstops, and pre-cast applications. Packaged in
330 feet per case.
Paste type in 11 oz.
cartridges. Used in many different applications such as piping
penetrations, sheetpile interlocks, rough surfaces, crack repair, etc. One
of the most versatile Adeka products.
Paste type in 11 oz.
cartridges. Similar to P-201 but has only 15% expansion. Used in many
different applications that do not require the full expansion of P-201.
Good for shallow joints, areas where less coverage is available, etc.
Pre-formed rubber strip . Size,
30mm X 30mm, (Approximately 1.2" X 1.2"). Used in expansion joints.
Stainless steel wire mesh to control and focus expansion. Three times
expansion by volume.
Pre-formed rubber strip . Size,
15mm X 10mm. Used in areas where concrete coverage in minimal. See data
sheet for conditions of use.
Pre-formed string. Size, 4mm
~ 40mm, (Approximately 0.2" ~ 1.6"). Used to waterproof sheetpiles, cracks
where running water is present. String size should be 1.2 times the width
of the gap. Packaged according to size of string.
Pourable two component
waterstop (15:1 ratio) for sheetpile interlocks. One set equals 4 gallons.
Click on PRODUCT name to view more information
Many files require Acrobat Reader to view or print
Acrobat Reader is a free product . If necessary, download
from www.acrobat.com
Concrete
Coverage