Friday, April 02, 2010

California Concert Series to Benefit Shriners Hospital



JP Specialties, Inc. is proud to once again provide corporate sponsorship for Rhythm on the Vine and Caring for Kids concert series – both benefiting Shriners Hospitals for Children. Shriners Hospitals is a one-of-a-kind international health care system of 22 hospitals where we treat children for orthopedic conditions, burns, spinal cord injuries, cleft lip palate in a family-centered environment – all at absolutely no charge.

Thursday, March 11, 2010

Earth Shield Retrofit Waterstop for a Variety of Applications


Joining new concrete to existing concrete requires the use of a waterstop if the joint is to be fluid-proof. However, this formed joint has always been problematic for Engineers and Contractors, as properly installing a standard waterstop across a preformed joint is difficult, expensive, and usually a compromise. Traditionally, Engineers have accomplished the task by specifying the use of a standard embedded waterstop within a sawcut and epoxy-grout filled channel. This labor-intensive and costly method has often produced questionable results due to the potential cold joint formed between the epoxy and the existing concrete surface from shrinkage. Furthermore, by sawcutting the existing concrete, the Contractor may be inadvertently destroying the reinforcing steel within the concrete.


Earth Shield currently manufactures six polymer systems that offer Engineers, Owners, and Contractors real solutions for retrofitting applications. All of the systems are non-destructive — there is no sawcutting of the existing concrete, and therefore no destruction of the internal reinforcing steel. All of the systems feature chemical bond (epoxy), as well as mechanical anchor system (stainless steel batten bar and bolts). All of the systems are manufactured from a fully cross-linked thermoplastic vulcanizate (TPV), which provides broad-spectrum resistance to a variety of aggressive chemicals, long life span (entire lifecycle of structure), and excellent physical properties (tensile strength, elongation, etc.).

All six Earth Shield retrofit waterstops systems can be installed either vertically or horizontally. Therefore, they are equally suited for joining slab to wall or wall to slab. A frequent application is for the Contractor to pour the slab monolithically; apply an Earth Shield retrofit waterstop system to the cured slab (green concrete is perfectly acceptable); and cast containment walls (curbs) on top of the waterstop. All of our retrofit waterstop systems can be factory fabricated to fit-to-print dimensions, leaving little to no welding for the Contractor in the field.

Monday, March 08, 2010

Secondary Containment Rules for New Zealand

Secondary containment is a system which will contain fuel spills if a fuel tank leaks or is damaged, and from which the fuel can be cleaned up after a spill. A secondary containment system must also have a capacity capable of containing a spill equaling 110% of the capacity of the largest fuel tank it contains.
General Provisions:
Where a total of 2000 liters or more of petrol and/or diesel is stored the person in charge of the farm must ensure that fuel is stored in a compound (bund). Where the total is below 2000 liters the fuel may alternatively be located so that any spillage will not endanger any building, or flow into any natural water body. Any tanks must be maintained so that valves, hoses and dispensers do not leak.

What is a Compound (Bund)?

A compound is a form of secondary containment consisting of a hollow, pit or structure which is capable of containing any fuel spill from the fuel storage. To comply with HSNO regulations it must:
  • Be of a size capable of holding 110% of the contents of the largest fuel tank; and be constructed of non-flammable materials (concrete, brick, HDPE, clay, earth or similar); and effectively retain the fuel if there is a spillage.
  • In areas with light, free draining soils (e.g. pumice or sandy soils), a compound must be lined with an additional impermeable layer (e.g. concrete, clay or brick) to stop spills entering groundwater.

Thursday, March 04, 2010

Pesticide Container and Containment Regulations At A Glance


The purpose of this document is to provide an outline of many of the requirements of the regulations “Standards for Pesticide Containers and Containment.”  This document reflects the requirements established in August 2006 and amended in October 2008.  With this document, EPA intends to facilitate the public’s ability to determine who is subject to the rule and how to comply.
Because this is a summary, many details are not included.  Refer to the Code of Federal Regulations (40 CFR parts 156 and 165) and the October 29, 2008 Federal Register Notice for the full version.
This Web page includes the following:
  1. Overview table of who must comply, a list of major requirements and the compliance date for each of the five areas of regulatory standards.
  2. Overview table of the products that are subject to the nonrefillable, refillable and repackaging regulations.
  3. A short summary of each of the five areas of the regulatory standards, addressing:

Wednesday, March 03, 2010

Spill Prevention, Control, and Countermeasure Bulk Storage Secondary Containment Requirements

For purposes of the SPCC requirements, secondary containment for bulk storage facilities must be constructed to at least provide for the capacity of the largest single tank with sufficient freeboard for precipitation.  EPA believes that the proper standard of "sufficient freeboard" to contain precipitation is that amount necessary to contain a 25-year, 24-hour storm event. There are several different types of secondary containment measures that could be used at a facility including:


Thursday, February 11, 2010

Oil Spill in Ingleside, Texas — Secondary Containment Breached


Ingleside, TX — Federal and local officials are dealing with an oil spill at the Falcon Refinery.
Some 25,000 barrels of crude oil spilled out of a ruptured storage tank.
Over two million gallons of oil are kept in the storage tanks at the refinery.
Two of these tanks ruptured causing thousands of gallons to leak.
Crews from the Texas General Land Office at 7:30 Wednesday came started to siphon the oil into another tank for secondary containment.
But the crew got an unfortunate surprise when that secondary containment tank started to leak.
Jimmy Martinez, the regional director of the Texas General Land Office said, "Oil has gotten into the secondary containment. We found 3 different locations where the oil escaped the secondary containment and now we have some free floating oil outside what they call a duck pond directly behind the facility here."
Crews from the environmental protection agency's emergency response team have flown in from Dallas. They are here to oversee the operation; specifically monitoring the oil's proximity to the coastline, and making sure that oil does not run into redfish bay.
No injuries to humans to report, but four oily birds were taken to the ARK in Port Aransas.
The EPA has previously classified this area as a potentially hazardous zone back in 2002.
The clean-up will continue all day Thursday. (Story by Spencer Lubitz)

Sunday, January 17, 2010

ACI Definition of Hazmat

A hazardous material is defined as having one or more of the following characteristics: ignitable (NFPA 49), corrosive, reactive, or toxic. The Environmental Protection Agency (EPA)-listed wastes are organized into three categories under RCRA: source specific wastes, generic wastes, and commercial chemical products. Source specific wastes include sludges and wastewaters from treatment and production processes in specific industries such as petroleum refining and wood preserving. The list of generic wastes includes wastes from common manufacturing and industrial processes such as solvents used in degreasing operations. The third list contains specific chemical products such as benzine, creosote, mercury, and various pesticides.

Monday, December 21, 2009

Applicability of SPCC Rules Summarized


The following sets forth the types of sources subject to the SPCC rule; the coverage has not changed substantially from the 2002 version of the SPCC rule:

The SPCC rule applies to owners or operators of non-transportation-related facilities that:
  • Drill, produce, store, process, refine, transfer, distribute, use, or consume oil or oil products; and
  • Could reasonably be expected to discharge oil to U.S. navigable waters or adjoining shorelines.
Facilities are subject to the rule if they meet at least one of the following capacity thresholds:
  • Aboveground oil storage capacity greater than 1,320 U.S. gallons, or completely buried oil storage capacity greater than 42,000 U.S. gallons.
The following are exempt from the rule:
  • Containers with a storage capacity less than 55 U.S. gallons of oil;
  • Permanently closed containers;
  • Motive power containers;
  • Wastewater treatment facilities;
  • Hot-mix asphalt and hot-mix asphalt containers;
  • Residential heating oil containers at single family residences;
  • Pesticide application equipment and related mix containers;
  • Completely buried storage tanks subject to all the technical requirements of the underground storage tank regulations;
  • Intra-facility gathering lines subject to U.S. Department of Transportation’s pipeline regulations; and Underground oil storage tanks at nuclear power generation facilities.
This article was authored by Barbara D. Little, Jackson Kelly PLLC. For more information on the author see here.

Wednesday, December 02, 2009

EPA SPCC Rule Deadline January 14th, 2010


On November 5, 2009, the EPA Administrator signed a notice amending certain requirements of the Spill Prevention, Control, and Countermeasure (SPCC) rule in order to address additional areas of regulatory reform that have been raised by the regulated community. The November 2009 amendments revise the December 2008 amendments as a result of EPA's review of comments and consideration of all relevant facts. EPA is either taking no action or providing minor technical corrections on the majority of the December 2008 provisions. However, this action modifies the December 2008 rule by removing the provisions to: exclude farms and oil production facilities from the loading/unloading rack requirements; exempt produced water containers at an oil production facility; and provide alternative qualified facilities eligibility criteria for an oil production facility.
Additionally, because of the uncertainty surrounding the final amendments to the December 5, 2008, rule and the delay of the effective date, EPA will propose to extend the compliance date.
This rule is effective January 14, 2010.

Friday, November 20, 2009

The Final "We Contain More" Magazine for 2009 Just Published



JP Specialties is pleased to have published our final issue of "We Contain More" magazine for 2009. The quarterly publication covers information important to Engineers, Contractors, and Owners of environmental engineered concrete structures. Please click the link and download your copy today.